[EU] Ruitoo M6 Max Dual-Motor All-Terrain Electric Scooter for Adults, 3000W Motor, 1248Wh Battery

Sì. La spedizione in tutto il mondo è già inclusa nel prezzo. Utilizziamo DHL express con tempi di consegna di 3 giorni.

Purpose: Adjust power output and battery efficiency by toggling between using one motor or both.

Steps:

1. Power on the scooter.

2. Press the power button three times quickly.

3. The system will switch between:

    1). Single Motor Mode – prioritizes battery life and lower speeds.

    2). Dual Motor Mode – activates both front and rear motors for maximum torque and acceleration.

Tip: Use single motor mode for flat urban roads to conserve energy, and dual motor mode for steep hills or off-road conditions.

Purpose: Customize your speed and distance units based on your regional or personal preference.

Steps:

1. Power on the scooter.

2. Press the power button five times to enter the settings mode.

3. Tap the power button once to enter P01 (display unit setting).

4. Tap the right-side power button until the number at the bottom-right of the LED screen begins flashing.

5. Tap once to toggle between:

    1). 0000 = KM/H

    2). 0001 = MPH

6. Wait for the number to stop flashing — the setting will save automatically.

Purpose: Maintain a consistent riding speed without holding the throttle, useful for long-distance travel.

Steps:

1. Power on the scooter.

2. Press the power button five times to enter the settings mode.

3. Tap the power button repeatedly until you reach P05 (cruise control setting).

4. Tap the right-side power button until the number "00000" starts flashing.

5. Tap once to change the value:

    1). 0000 = OFF (cruise control disabled)

    2). 0001 = ON (cruise control enabled)

6. Wait until the number stops flashing. The mode will now be active.

Note: Cruise control only activates after maintaining the same throttle position for several seconds while riding.

Purpose: Choose whether the scooter can accelerate from a stop using the throttle alone (Zero Start) or requires a manual kick-off first (Non-Zero Start) for added safety.

Steps:

1. Turn on the scooter.

2. Press the power button five times to enter the settings menu.

3. Tap the button until you reach P06 (start mode setting).

4. Tap the right power button until the bottom-right value flashes.

5. Tap once to choose:

    1). 00000 = Zero Start (throttle can start scooter from a stop)

    2). 00001 = Non-Zero Start (requires a manual push before throttle engages)

6. Wait until the screen stops flashing.

Safety Tip: If you're new to electric scooters, it's recommended to use Non-Zero Start for extra control.

Una volta ricevuto il tuo ordine, riceverai automaticamente un'e-mail di conferma. Gli ordini effettuati prima delle 14:00 (CET) saranno ritirati, imballati e spediti lo stesso giorno. I tempi di consegna sono solitamente di 2-4 giorni lavorativi con DHL Express.

Se desideri cambiare un prodotto con un altro modello, colore del cinturino ecc., contattaci in modo che possiamo riservare immediatamente il nuovo articolo nel nostro stock. Hai sempre diritto a uno scambio o a un rimborso entro 30 giorni dalla ricezione del pacco, a condizione che l'articolo non sia stato utilizzato.