[EU] Ruitoo M6 Max Dual-Motor All-Terrain Electric Scooter for Adults, 3000W Motor, 1248Wh Battery

Oui. L'expédition dans le monde entier est déjà incluse dans le prix. Nous utilisons DHL Express avec un délai de livraison de 3 jours.

Purpose: Adjust power output and battery efficiency by toggling between using one motor or both.

Steps:

1. Power on the scooter.

2. Press the power button three times quickly.

3. The system will switch between:

    1). Single Motor Mode – prioritizes battery life and lower speeds.

    2). Dual Motor Mode – activates both front and rear motors for maximum torque and acceleration.

Tip: Use single motor mode for flat urban roads to conserve energy, and dual motor mode for steep hills or off-road conditions.

Purpose: Customize your speed and distance units based on your regional or personal preference.

Steps:

1. Power on the scooter.

2. Press the power button five times to enter the settings mode.

3. Tap the power button once to enter P01 (display unit setting).

4. Tap the right-side power button until the number at the bottom-right of the LED screen begins flashing.

5. Tap once to toggle between:

    1). 0000 = KM/H

    2). 0001 = MPH

6. Wait for the number to stop flashing — the setting will save automatically.

Purpose: Maintain a consistent riding speed without holding the throttle, useful for long-distance travel.

Steps:

1. Power on the scooter.

2. Press the power button five times to enter the settings mode.

3. Tap the power button repeatedly until you reach P05 (cruise control setting).

4. Tap the right-side power button until the number "00000" starts flashing.

5. Tap once to change the value:

    1). 0000 = OFF (cruise control disabled)

    2). 0001 = ON (cruise control enabled)

6. Wait until the number stops flashing. The mode will now be active.

Note: Cruise control only activates after maintaining the same throttle position for several seconds while riding.

Purpose: Choose whether the scooter can accelerate from a stop using the throttle alone (Zero Start) or requires a manual kick-off first (Non-Zero Start) for added safety.

Steps:

1. Turn on the scooter.

2. Press the power button five times to enter the settings menu.

3. Tap the button until you reach P06 (start mode setting).

4. Tap the right power button until the bottom-right value flashes.

5. Tap once to choose:

    1). 00000 = Zero Start (throttle can start scooter from a stop)

    2). 00001 = Non-Zero Start (requires a manual push before throttle engages)

6. Wait until the screen stops flashing.

Safety Tip: If you're new to electric scooters, it's recommended to use Non-Zero Start for extra control.

Une fois votre commande reçue, vous recevrez automatiquement un e-mail de confirmation de votre commande. Les commandes passées avant 14h00 (CET) seront préparées, emballées et expédiées le jour même. Le délai de livraison est généralement de 2 à 4 jours ouvrables avec DHL Express.

Si vous souhaitez changer un produit pour un autre modèle, une autre couleur de bracelet, etc., veuillez nous contacter afin que nous puissions réserver immédiatement le nouvel article dans notre stock. Vous avez toujours droit à un échange ou un remboursement dans les 30 jours suivant la réception de votre colis, à condition que l'article n'ait pas été utilisé.